Job responsibilities:
1.Assembly diesel high pressure common rail system, commercial vehicle and passenger vehicle engine performance & Vehicle Emission calibration, technical support for engine emission related function in customer project;
2.optimization and compilation of engine bench test automatic program;
3.engine bench test, optimize the calibration of injection system for emission, fuel consumption, performance and combustion noise;
4.Analysis and summary of engine bench test results;
5.Research on engine emission potential and optimization of engine cold start;
6.responsible for writing the relevant experimental reports.
Job requirements:
1.Bachelor degree or above, master degree in mechanical engineering, major in engine or automobile;
2.relevant working experience in the same industry for more than 5 years;
3.familiar with BOSCH system development process, BOSCH system calibration, familiar with engine performance test, emission regulation, driver license is preferred;
4.Good team work spirit and able to travel.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.Conduct vehicle performance calibration experiments;
2.Calibration of vehicle driving, calibration of air system and auxiliary function;
3.Familiar with engine emission regulation and vehicle country five emission regulation;
4.familiar with diesel engine high-pressure common rail system control strategy and calibration process;
5.Carry out vehicle verification test under extreme weather conditions (plateau, alpine & high temperature test).
Job requirements:
1.Bachelor degree or above, major in engine or automobile;
2.relevant working experience in the same industry for more than 5 years;
3.familiar with BOSCH system development process, BOSCH system calibration, diesel engine development test experience, driver's license is preferred;
4.Good team work spirit and able to travel.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.Diagnose and calibrate the common rail system;
2.familiar with engine, vehicle emission regulations and OBD test;
3.responsible for writing engine and vehicle OBD test plan and test process;
4.responsible for writing the relevant test reports.
Job requirements:
1.Bachelor degree or above;
2.major in engine or automation;
3.over 2 years experience in diesel engine development and test;
4.good team work spirit and able to travel;
5.familiar with BOSCH system development process and BOSCH system calibration, driver's license is preferred.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.DPF or SCR aftertreatment emission strategy calibration;
2.vehicle calibration and system troubleshooting and calibration;
3.responsible for writing engine and vehicle test plan and test process;
4.responsible for writing the relevant test reports.
Job requirements:
1.Bachelor degree or above;
2.major in engine and automobile;
3.over 2 years experience in diesel engine development and test;
4.strong team work spirit and able to travel;
5.familiar with BOSCH system development process and BOSCH system calibration is a plus, driver's license is preferred.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.Familiar with engine emission regulation and vehicle country five emission regulation;
2.Familiar with high pressure common rail system and relative calibration strategy, simple adaptive calibration;
3.related technical work arranged by leader;
4.Prepare related technical reports.
Job requirements:
1.graduate degree or outstanding undergraduate;
2.major in engine, vehicle engineering;
3.work carefully and carefully, have stronger study and study ability;
4.BOSCH system internship experience, driving license is preferred.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.Familiar with engine emission regulation and vehicle country five emission regulation;
2.Familiar with high pressure common rail system and relative calibration strategy, simple adaptive calibration;
3.related technical work arranged by leader;
4.Prepare related technical reports.
Job requirements:
1.graduate education or key university outstanding undergraduate;
2.major in engine and automobile;
3.work carefully and carefully, have stronger study and study ability;
4.BOSCH system internship experience, driving license is preferred.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.Follow up the vehicle / engine calibration project and control the progress of the project, and control the whole process node of the project;
2.contract tracking in time, customer problems timely feedback processing;
3.Coordinate the work between internal and external departments;
4.for the company to explore the market to provide relevant support;
Job requirements:
1.2 years work experience
2.stable, proactive and strong learning ability
3.Long term willingness to work as project manager
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.propose electrical control plan according to equipment requirement;
2.Responsible for schematic design, type selection and programming control of electrical control equipment;
3.responsible for equipment electrical installation and debugging;
4.electrical, graphic data collection, collation, archiving, complete the acceptance of new equipment;
5.be responsible for equipment spare parts management, supervise spare parts consumption and form consumption record;
6.responsible for equipment and maintenance parts improvement and optimization, improve equipment efficiency, reduce equipment downtime and maintenance costs;
7.prepare preventive maintenance plan and maintenance procedure;
8.responsible for preventive maintenance plan implementation, equipment maintenance time collection and maintenance record arrangement;
9.responsible for equipment electrician training;
10.temporary tasks assigned by the department.
Job requirements:
1.Bachelor degree or above in electrical, automation, mechanical or electrical engineering;
2.proficient in a variety of sensors, transmitters, relay control circuit, electrical drawing, stepper servo motion control, AC and DC speed control, process control, programmable controller, touch screen man-machine communication, industrial control, automation, office automation, computer application, VB, monolithic machine etc.;
3.experience in mechanical / automation industry, hands-on experience;
4.familiar with office software, computer aided design software: ACAD, Pro/E and so on;
5.familiar with TS/16949 quality system operation procedure;
6.English level four or above;
7.good character, steady and meticulous work, active thinking, innovative spirit, good sense of teamwork.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
Job responsibilities:
1.propose mechanical system according to equipment requirement;
2.responsible for mechanical design of equipment, mechanical control, parts selection;
3.responsible for the installation and debugging of equipment mechanical parts, ensure the operation stability and accuracy;
4.responsible for collecting, sorting and improving equipment information, complete the acceptance of new equipment;
5.responsible for equipment spare parts management, supervision of spare parts consumption, the formation of consumption records;
6.responsible for equipment and maintenance parts improvement and optimization, improve equipment efficiency, reduce equipment downtime and maintenance costs;
7.Prepare preventive maintenance plan and maintenance procedure;
8.responsible for the implementation of preventive maintenance plan, equipment maintenance time collection and maintenance records;
9.responsible for the training of equipment mechanics;
10.temporary tasks assigned by the department.
Job requirements:
1.Bachelor degree or above in mechanical, mechanical and electrical, automation, etc.;
2.Familiar with mechanical design, machining and assembly process, material, heat treatment knowledge, basic mechanical system;
3.familiar with hydraulic and pneumatic maintenance, strong troubleshooting and maintenance capability;
4.familiar with common office software, computer aided design software: ACAD, Pro/E and so on, you can map according to need;
5.familiar with TS/16949 quality system operation procedure;
6.English level four or above;
7.good character, steady and meticulous work, active thinking, innovative spirit, good sense of teamwork.
Working hours: 8:30-17:00 weekend double cease, welfare treatment is excellent.
